China Wholesale Hook Eye Bolt Manufacturers - Carbon Steel/Stainless Steel Threaded Rod DIN 975 – Yateng
China Wholesale Hook Eye Bolt Manufacturers - Carbon Steel/Stainless Steel Threaded Rod DIN 975 – Yateng Detail:
Product Description:
| Product name | Threaded Rod |
| Size | M5-72 |
| Length | 10-3000mm or as required |
| Grade | 4.8/8.8/10.9/12.9/SS304/SS316 |
| Material | Steel/35k/45/40Cr/35Crmo/Stainless steel |
| Surface treatment | Plain/Black/Zinc/HDG |
| Standard | DIN/ISO |
| Certificate | ISO 9001 |
| Sample | Free Samples |
The threaded rod is a highly accurate part. It can accurately determine the coordinate position of the table, convert rotary motion into linear motion, and also transmit a certain amount of power to the surface. Therefore, it has all aspects of accuracy, strength, and wear resistance.There are high requirements.Therefore, every step of the processing of the screw from the blank to the finished product must be carefully considered to improve its processing accuracy.
Five advantages of stainless steel:
1. High hardness, no deformation —– The hardness of stainless steel is more than 2 times higher than that of copper, more than 10 times higher than that of aluminum, the processing is difficult, and the production process is complicated.
2.Durable and non-rusty —- made of stainless steel, the combination of chrome and nickel creates a layer of anti-oxidation on the surface of the material, which plays the role of rust.
3.Environmentally friendly, non-toxic and non-polluting ——- Stainless steel material has been recognized as sanitary, safe, non-toxic and resistant to acids and alkalis. It is not released to the sea and does not pollute tap water.
4. Beautiful, high-grade, practical ——– Stainless steel products are popular all over the world. The surface is silver and white. After ten years of use, it will never rust. As long as you wipe it with clean water, it will be clean and beautiful, as bright as new.
Product advantages:
- Precision Machining
☆ Measure and process using precision machine tools and measuring tools under strictly controlled environmental conditions.
- High-quality
☆ With long life, low heat generation, high hardness, high rigidity, low noise, high wear resistance and other characteristics.
- Cost-effective
☆ The use of high-quality carbon steel steel, after precision processing and forming, greatly improves the user experience.
Surface treatment:
- BLACK
☆ Black is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention. Blackening is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention.
- ZINC
☆ Electro-galvanizing is a traditional metal coating treatment technology that provides basic corrosion resistance to metal surfaces. The main advantages are good solderability and suitable contact resistance. Due to its good lubrication properties, cadmium plating is commonly used in aviation, aerospace, marine, and radio and electronic products. The plating layer protects the steel substrate from both mechanical and chemical protection, so its corrosion resistance is much better than zinc plating.
- HDG
☆ The main advantages are good solderability and suitable contact resistance. Due to its good lubrication properties, cadmium plating is commonly used in aviation, aerospace, marine, and radio and electronic products. The plating layer protects the steel substrate from both mechanical and chemical protection, so its corrosion resistance is much better than zinc plating. Hot-dip zinc has good corrosion resistance, sacrificial protection for steel substrates, high weather resistance, and resistance to salt water erosion. It is suitable for chemical plants, refineries and coastal and offshore operating platforms.
Common questions about stainless steel:
Q: Why is stainless steel magnetic?
A: 304 stainless steel belongs to austenitic stainless steel. Austenite is partially or slightly transformed into martensite during cold working. Martensite is magnetic, so stainless steel is nonmagnetic or weakly magnetic.
Q: How to identify authentic stainless steel products?
A: 1. Support stainless steel special potion test, if it does not change color, it is authentic stainless steel.
2. Support chemical composition analysis and spectral analysis.
3. Support smoke test to simulate the actual use environment.
Q: What are the most commonly used stainless steels?
A: 1.SS201, suitable for use in dry environment, easy to rust in water.
2.SS304, outdoor or humid environment, strong resistance to corrosion and acid.
3.SS316, molybdenum added, more corrosion resistance, especially suitable for seawater and chemical media.
Parameter Of Product:
OUR PACKAGE:
1. 25 kg bags or 50kg bags.
2. bags with pallet.
3. 25 kg cartons or cartons with pallet.
4. Packing as customers’ request
Product detail pictures:
Related Product Guide:
Our organization promises all customers with the first-class products and solutions and the most satisfying post-sale service. We warmly welcome our regular and new clients to join us for China Wholesale Hook Eye Bolt Manufacturers - Carbon Steel/Stainless Steel Threaded Rod DIN 975 – Yateng , The product will supply to all over the world, such as: Doha, Adelaide, Iran, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to in your case of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We've been confident that we've been going to have a bright prospect and to be distributed all over the world in the years to come.
By Bertha from Nepal - 2018.06.19 10:42
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Nicole from Indonesia - 2017.12.02 14:11
