Carbon Steel DIN 6923 Flange Nut
Product Description:
| Product name | Flange Nut |
| Size | M5-20 |
| Grade | 4.8/8.8/10.9/12.9 |
| Material | Steel/35k/45/40Cr/35Crmo |
| Surface treatment | Plain/Black/Zinc/HDG |
| Standard | DIN/ISO |
| Certificate | ISO 9001 |
| Sample | Free Samples |
Usage:
The flange nut is mainly used to increase the contact surface with the work piece. It is mostly used in pipelines, and the fasteners have been stamped and stamped.
Flange nuts and general hex nuts are basically the same size as the thread specifications, but compared to hex nuts, it is a one-piece gasket and nut, and has non-slip tooth patterns underneath, which increases the nut and the workpiece The surface area contact is stronger and stronger than the combination of ordinary nut and washer.
Product advantages:
- Precision Machining
☆ Measure and process using precision machine tools and measuring tools under strictly controlled environmental conditions.
- High-quality carbon steel
☆ With long life, low heat generation, high hardness, high rigidity, low noise, high wear resistance and other characteristics.
- Cost-effective
☆ The use of high-quality carbon steel steel, after precision processing and forming, greatly improves the user experience.
Surface treatment:
- BLACK
☆ Black is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention. Blackening is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention.
- ZINC
☆ Electro-galvanizing is a traditional metal coating treatment technology that provides basic corrosion resistance to metal surfaces. The main advantages are good solderability and suitable contact resistance. Due to its good lubrication properties, cadmium plating is commonly used in aviation, aerospace, marine, and radio and electronic products. The plating layer protects the steel substrate from both mechanical and chemical protection, so its corrosion resistance is much better than zinc plating.
- HDG
☆ The main advantages are good solderability and suitable contact resistance. Due to its good lubrication properties, cadmium plating is commonly used in aviation, aerospace, marine, and radio and electronic products. The plating layer protects the steel substrate from both mechanical and chemical protection, so its corrosion resistance is much better than zinc plating. Hot-dip zinc has good corrosion resistance, sacrificial protection for steel substrates, high weather resistance, and resistance to salt water erosion. It is suitable for chemical plants, refineries and coastal and offshore operating platforms.
Parameter Of Product:
DIN 6923 STANDARD
OUR PACKAGE:
1. 25 kg bags or 50kg bags.
2. bags with pallet.
3. 25 kg cartons or cartons with pallet.
4. Packing as customers' request
